Band Pass Filter</p> From 400Hz to 430MHz-Band Pass Filter-ENRICHTEK Provides Flexible Customization-ENRICHTEK Provides Flexible Customization

HOME >> Products >> Band Pass Filter

Band Pass Filter

From 400Hz to 430MHz

Brand :ENRICHTEK

P/N :EBP-E4-E43

MOQ :1

REQUEST QUOTE

Band pass filter is a kind of RF filter used to eliminate unwanted side bands and remove spurious interference and noise.

The frequency of this cavity band pass filter EBP-E4-E43 is from 400MHz to 430MHz with a 30MHz bandwidth, the maximum handing power is 20 Watt(CW)

With a 50 Ohm impedance, the VSWR of this band pass filter EBP-E4-E43 is less than 1.35.

The insertion loss of this band pass filter EBP-E4-E43 is less than 1.4dB and the passband ripple is less than 0.5dB.

The stop band rejection is larger than 80dB@340-360MHz .

The band pass filter EBP-E4-E43 has been tested and proven as all our standard RF filter products.

With high performance, good stability and consistency, RF filters from ENRICHTEK are wildly used in education, industry and aviation.

ENRICHTEK supports band pass filter customization, such as changing the electrical parameters, the cutoff frequency, mechanical structure, or connectors etc.

Electrical Specifications

Parameters	Typical Value
Center Frequency	415MHz
Pass Band Frequency	400～430MHz
Insertion Loss	≤1.4dB
Ripple in Band	≤0.5dB
VSWR	≤1.35:1
Rejection	≥80dB @ 340～360MHz
Impedance	50 ohms
Power	≤20W
Surface Finish	Black Paint
Net Weight	0.78 KG

Mechanical Specifications

Dimensions	1909335mm
Connectors	N-Female

Environmental Specifications

Operating Temperature	-40 to +70ºC
Storage Temperature	-55 to +95 ºC

Typical Performance

400-430MHz Cavity Band Pass Filter.png

Outline Drawing (unit: mm)

400~430MHz Band Pass Filter9.png

ature